Filter Results By
Bootstrap Example

Product Name Melt Mass Flow Rate
(2.16 kg, g/10 min, ASTM D1238)
Density
(g/cm3, ASTM D792)
Datasheets
LDPE 150E 0.25 0.923 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 150E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 2300C. LDPE 150E resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
LDPE 310E 0.75 0.924 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 310E is a fractional melt index low density polyethylene resin. LDPE 310E has been specially designed for superior processability on blown films lines leading to significant output improvements

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
LDPE 312E 0.75 0.924 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 312E is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. LDPE 312E has been specially designed for superior processability on blown films lines leading to significant output improvements

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
LDPE 352E 2 0.925 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 352E Low Density Polyethylene Resin is a high clarity resin designed for clarity over wraps applications. This resin does contain slip and antilock additives.

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
LDPE 450E 2 0.924 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 450E Low Density Polyethylene Resin has been designed with and optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
LDPE 582E 3.5 0.923 PDF Make an Inquiry

Typical Properties / Applications

Technical Datasheet

Safety Datasheet

Share This Product

LDPE 582E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives

PDF PDF
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter

Products

Typical Properties / Applications

LDPE 150E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 2300C. LDPE 150E resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties

Melt Mass Flow Rate
0.25
Density
0.923
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF

Typical Properties / Applications

LDPE 310E is a fractional melt index low density polyethylene resin. LDPE 310E has been specially designed for superior processability on blown films lines leading to significant output improvements

Melt Mass Flow Rate
0.75
Density
0.924
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF

Typical Properties / Applications

LDPE 312E is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. LDPE 312E has been specially designed for superior processability on blown films lines leading to significant output improvements

Melt Mass Flow Rate
0.75
Density
0.924
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF

Typical Properties / Applications

LDPE 352E Low Density Polyethylene Resin is a high clarity resin designed for clarity over wraps applications. This resin does contain slip and antilock additives.

Melt Mass Flow Rate
2
Density
0.925
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF

Typical Properties / Applications

LDPE 450E Low Density Polyethylene Resin has been designed with and optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion

Melt Mass Flow Rate
2
Density
0.924
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF

Typical Properties / Applications

LDPE 582E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives

Melt Mass Flow Rate
3.5
Density
0.923
Share This Product
  • Share via Email
  • Share via Facebook
  • 男人天堂影视 Twitter
Technical Datasheet
PDF
Safety Datasheet
PDF